Energy-saving lamps

About product

The compact energy saving and luminescent lamps.

The compact energy saving and luminescent lamps (CLL) are the modern economic light source, possessing essentially more luminous efficacy (with ratio between light stream and power consumption) for example, in comparison with the most widespread in use now - the incandescent lamps (IL). Lamps can be used both in the living accommodation, and in offices and in community offices. Compact luminescent lamps are delivered with standard lamp-base Е27 and designed for circuit voltage 220 - 240 W, with frequency of 50/60 Hz.

For certain, everyone knows that decrease in СО2 emission is the live issue of all mankind. Each person living on this earth can participate for the decision of the given problem. Hereby, we wish to pay attention to СО2 emission decrease by replacement of one incandescent lamp to the compact energy saving luminescent lamps. At equal light output with the traditional incandescent lamps – the energy saving lamp consumes electric power on 80 % less. Thanks to this, replacement of the incandescent lamps to the energy saving ones promotes energy saving. Thus, lamp service life upon the average in 8 times more, than the incandescent lamp has.

 The comparison table of CLL and IL light flux

Lm  Value

Incandescent lamp power

Energy saving lamp power 

220

25W

5W

720

60W

12W

1360

100W

20W

1900

150W

30W

2600

225W

45W

3590

325W

65W

4875

425W

85W

5985

525W

105W

7125

600W

120W

 

Calculation of decrease of СО2 emissions from the natural gas-fired power station.

IL/CLL Power consumption

Total Power consumption of IL/CLL

СО2 emissions in kg

Index of СО2 emissions per year

40/9

73/16,4

29,5/6,6

22,9

60/11

109,5/20,1

44,2/8,1

36,1

100/20

182,5/36,5

73,7/14,7

59

Sale information

«Shurtan gaz kimyo majmuasi» MChJda quyidagi tayyor mahsulotlar ishlab chiqariladi:
 diametri 20 mm dan 630 mm gacha boʼlgan har xil qalinlikdagi 0,25 MRa dan 1,0 MRa bosimga chidamli polietilen quvurlar va fitinglar
 tomchilab sugʼorish sistemasi (SKO)
 turli xil rangdagi alyumin kompozit panellar (АKP)
 10 litr sigʼimdagi polietilen kanistralar
 energiya tejovchi spiral lampalar 
“Shurtan gaz kiyo majmuasi” MChJ da ishlab chikarilgan tayyor maxsulotlarni (polietilen quvur va fitinglarni, tomchilab sugʼorish sistemasi, alyumin kompozit panellar, polietilen kanistralar, energiya tejovchi spiral lampalar) sotish toʼgʼridan toʼgʼri shartnoma tuzish orqali amalga oshiriladi.
Shartnomalar Oʼzbekiston Respublikasi hoʼjalik yurituvchi subektlarning shartnomaviy huquqiy bazasi toʼgʼrisidagi qonunga asosan tuziladi 
Shartnoma tuzish uchun mijozlarning talabiga asosan tayyor maxsulotlar narxlar roʼyxati (prays-list) taqdim etiladi. Mijoz taqdim etilgan narxlar roʼyxatiga asosan sotib olishi kerak boʼlgan maxsulotlarga shartnoma tuzish uchun yozma ravishda murojaat xati yuborishi va xatda korxonaning toʼliq rekvizitlari boʼlishi shart.
Mijozning talabiga karab «Shurtan gaz kimyo majmuasi» MChJ rahbariyatining topshirigʼiga asosan 2 (ikki) nusxada shartnoma tuzilib, ikki tomonning roziligi orqali imzolanadi. Shartnoma imzolangandan soʼng, sotuvchi mijozga shartnomada koʼrsatilgan maxsulotlarni ishlab chiqarib berish va yuklashga tayyorligi xaqida yozma ravishda xat (hisob varaq) taqdim etiladi. Shartnomada koʼrsatilgan mahsulotlar uchun 100% oldindan toʼlov amalga oshrilgandan soʼng, 25 bank ish kuni ichida soʼralgan mahsulotlar ishlab chiqarib yuklab beriladi. Taqdim etilgan hisob fakturaga asosan mijoz 100% oldindan pul koʼchiradi va shartnomaga asosan tayyor boʼlgan mahsulotni olib ketish uchun mijoz oʼzining taʼminotchi (ekspeditor) xodimini yuborishi shart.
Mahsulotni olib ketish uchun kelgan mijoz quyidagi hujjatlarni taqdim etadi:
1. Mahsulotni olish uchun ishonchnoma (материальный доверенность)
2. Shaxsini tasdiqlovchi hujjat (pasport)
3. Mahsulot uchun tuzilgan shartnoma nusxasi
4. Maxsulot uchun koʼchirilgan pul talabnomasi (банковский поручения)
Mijoz tomonidan takdim etilgan hujjatlarga asosan xisob-kitob boʼlimida (buxgalteriya) tayyor mahsulot uchun hisob-varaqasi (счёт-фактура) yozilib imzolanadi va tovar olish uchun mijozga beriladi.
Mahsulotlarni yetkazib berish sharti EXW (samovыvoz) xaridor tomonidan olib ketiladi.
Soʼralgan maxsulotlar Qarshitermoplast sexidan yuklab beriladi.